9.1 Basic settings for the heat pump
The basic settings can be found in the Heat pump menu.
Time and date
For the heating programme to work as desired, the year, date and time of the controller clock must be set correctly under System clock.
The heat pump will not start until the clock is properly set.
Language selection
You can change the interface language under Language selection. By default, the heat pump’s language is Finnish.
The language options are Finnish, English and Swedish.
If the user interface is in Finnish, the language selection can be found under Lämpöpumppu►Kielenvalinta.
Heat pump operating mode
You can start the heat pump under HP operating mode. When delivered from the factory, the device is set to Off. When you set the mode to Auto, the heat pump automatically starts heating the domestic and heating water as needed.